5.000 mile check-up

I will only hit on the big items:

1. All fluids are changed.

2. Your oil filter is changed.

3. The battery is removed from your cycle and is cleaned and tested.

4. Your primary chain is adjusted.

5. Your clutch is adjusted both inside the primary and cable adjuster.

6. Your rear belt is inspected and adjusted.

7. Front and Rear tires are inspected.

8. Front and rear brakes are inspected and replaced, as needed.

9. Spoke wheels are checked for adjustment and trued, as needed.

10. Throttle cables are adjusted.

11. All exhaust is inspected and re-tightened, as needed.

12. All motor mounts are inspected and checked for tightness.

13. Check front end free fall adjust neck race, as needed.

14. Lubricate all cables; clutch and throttle.

15. Adjust fasteners as required.

16. Complete road test.

17. Check all lights; head, tail and turn, replace as needed.

18. When done your cycle will have received a complete safety inspection and if there are any concerns they will be discussed with you.

19. Your cycle will be hooked up from your computer to our computer for a complete check of your charging system output, a complete idle speed print out and a complete 2-page print out that you may retain.

20. Finally, all oil waste, oil filter waste is disposed of properly.

**Please note as needed parts are not included in our labor charge**